| General-Purpose Austenitic Coil | 304 / 304L | 0.30–6.00 mm | 20–1,600 mm | 2B, BA, No. 4, HL, No. 1 | Food equipment, kitchenware, architectural panels, tanks, general fabrication | 2,300–3,200 | 5 metric tons | 4–8 weeks | FOB for buyer-controlled freight; CFR/CIF for delivered port budgeting | Mill test certificate, surface roughness, width tolerance, edge condition, coil weight |
| Marine and Chemical-Resistant Coil | 316L | 0.40–6.00 mm | 20–1,600 mm | 2B, BA, No. 4, No. 1 | Marine hardware, pharmaceutical equipment, chemical processing, coastal construction | 2,900–4,100 | 5 metric tons | 5–9 weeks | CFR/CIF when ocean freight and insurance need to be compared in one landed quote | Molybdenum content, PMI verification, pitting resistance, passivation, corrosion test requirements |
| Ferritic Appliance and Automotive Coil | 430 | 0.30–3.00 mm | 20–1,500 mm | 2B, BA, No. 4, HL | Appliance trim, cookware, automotive exhaust components, decorative panels | 1,700–2,400 | 5 metric tons | 4–7 weeks | FOB or CFR; use CIF only after confirming destination-port insurance coverage | Magnetic properties, forming performance, surface defects, flatness, chromium content |
| High-Temperature Austenitic Coil | 321 | 0.50–5.00 mm | 20–1,500 mm | 2B, No. 1, No. 4 | Heat exchangers, exhaust systems, furnace parts, aerospace and thermal-service components | 3,500–5,000 | 5–10 metric tons | 6–10 weeks | CFR or CIF for heavy industrial shipments; confirm heat-treatment documentation | Titanium stabilization, intergranular corrosion test, high-temperature strength, heat number traceability |
| Duplex Corrosion-Resistant Coil | 2205 | 0.50–6.00 mm | 20–1,500 mm | 2B, No. 1, No. 4 | Oil and gas equipment, pressure vessels, desalination, pulp and paper, offshore structures | 3,500–5,200 | 5–10 metric tons | 6–11 weeks | CFR/CIF with marine cargo insurance and moisture-protection requirements specified | Ferrite-austenite balance, solution annealing, impact testing, chloride corrosion resistance |
| Low-Cost Automotive Ferritic Coil | 409 / 409L | 0.40–3.00 mm | 20–1,500 mm | 2B, No. 1 | Automotive exhaust tubing, heat shields, industrial mufflers, non-decorative components | 1,600–2,300 | 5 metric tons | 4–8 weeks | FOB for repeat buyers; CFR for consolidated automotive supply programs | Weldability, oxidation resistance, yield strength, coil camber, edge cracking after forming |
| Cold-Forming High-Strength Coil | 301 / 301L | 0.15–3.00 mm | 10–1,500 mm | 2B, BA, No. 4 | Clips, springs, stamped parts, elevator components, transport and electrical parts | 2,300–3,300 | 3–5 metric tons | 5–9 weeks | FOB or FCA for slit-coil programs; CFR for full-container orders | Temper condition, tensile strength, elongation, springback, burr height, slit-width tolerance |
| Premium Acid-Resistant Coil | 904L | 0.50–5.00 mm | 20–1,500 mm | 2B, No. 1, No. 4 | Sulfuric-acid equipment, chemical tanks, pollution-control systems, specialty process plants | 6,500–9,500 | 3–5 metric tons | 7–12 weeks | CIF or DAP only when insurance, documentation, and destination handling are clearly itemized | Nickel and molybdenum content, corrosion testing, weldability, certification, packaging integrity |
Your message must be between 20-3,000 characters!
